Home > news > What should be paid attention to when stainless steel belt is produced
What should be paid attention to when stainless steel belt is produced
- 2020-05-19-

Stainless steel strip is relatively simple to rust in water and air, and the corrosion rate of zinc in the atmosphere is only 1/15 of the corrosion rate of steel in the atmosphere. Galvanized steel sheet is protected by a micro-dense galvanized layer. Corroded. Stainless steel belt refers to the conveyor belt made of carbon steel as the traction and carrying component of the belt conveyor. It can also be used to bundle goods. It is used by various steel rolling enterprises to get used to the industrial production of various metal or mechanical products in different industrial sectors. A narrow and long steel plate produced.

The width of stainless steel strip is within 1300mm, and the length is slightly different according to the size of each roll. Strip steel is generally supplied in coils, which has the advantages of high dimensional accuracy, good appearance quality, easy processing, and material saving. According to the raw materials used, steel strips are divided into two types: ordinary strip steel and high-quality strip steel. According to the processing method, they are divided into two types: hot-rolled steel strip and cold-rolled steel strip.

Stainless steel strip has a large output, a wide range of uses, and a wide variety of steel products. According to the processing method, it is divided into hot-rolled steel strip and cold-rolled steel strip; according to the thickness, it is divided into thin steel strip (thickness not greater than 4mm) and thick steel strip (thickness greater than 4mm), and divided into wide steel strip according to width (width greater than 600mm) And narrow steel strips (width not greater than 600mm), narrow steel strips are divided into direct rolling narrow steel strips and slitting narrow steel strips from wide steel strips. According to their appearance, they are divided into original rolling appearance and plating (coating) appearance. Steel belts are divided into general and special (such as hulls, bridges, oil drums, welded pipes, packaging, self-generating vehicles, etc.) steel belts according to their uses.

Stainless steel belt production matters

1. Before starting up, you must first check whether the rolling parts and electrical parts of the equipment are safe and reliable. If there is any abnormality, you must promptly find the relevant personnel to repair it.

2. The piled materials on the work site should be neat, and there should be no obstacles on the passage.

3. The operator must wear work clothes, tie the cuffs and corners tightly, wear work caps, gloves, and protective goggles.

4. When driving, it is forbidden to clean, refuel and repair the equipment, nor to clean the work site. It is forbidden to touch the steel belt and rolling parts with your hands when driving.

5. It is forbidden to put things or other objects on the equipment or protective cover while driving.

6. When using electric hoist hoisting, the safety operation rules of electric hoist should be followed, and the wire rope should be checked whether it is intact and easy to use, and pay attention to whether the hook is hung well. It is not allowed to hang the steel belt diagonally or hang the steel belt in the air during the production process.